Skip to content
Pakistan Era logo
Lifestyle

Men's Blazer and Suit Size Chart in Pakistan: SS to 5XL in Inches, Chest 40 to 52

Men's blazer and suit size chart in Pakistan, SS to 5XL in inches: chest 40 to 52, shoulder, sleeve, length and waist, plus what a tailor can and cannot fix.

Mahnoor Siddiqui, author at Pakistan EraMahnoor Siddiqui5 min read
A charcoal wool blazer hanging on a wooden hanger against a plain cream wall, for the men's blazer and suit size chart in Pakistan

A men's blazer or suit jacket in size M from Diners has a 42 inch chest, a 19 inch shoulder, 25 inch sleeves and a 29 inch length, with a matching 34 inch waist. The chart runs from SS at a 40 inch chest to 5XL at 52 inches. The full table is below, along with how to measure and which parts of a jacket a tailor can and cannot fix.

A blazer is the hardest thing in a man's wardrobe to buy online. A kurta can be a little loose. A jacket cannot. The shoulder either sits right or the whole thing looks borrowed. The figures below all come from one brand's printed chart, so the steps from size to size are real.

Men's blazer and suit size chart, SS to 5XL in inches

On the Diners suiting and blazer chart the chest grows from 40 to 52 inches across nine sizes, SS to 5XL. Shoulder runs 17 to 23 inches, sleeves 24.5 to 29, length 27.5 to 33, and the matching waist 30 to 46 inches.

SizeChestShoulderSleeveLengthWaist
SS401724.527.530
S411824.52832
M4218252934
L4319252936
XL4520263038
XXL4620263140
3XL4821273142
4XL5022283244
5XL5223293346
Men's blazer size chart in Pakistan: SS chest 40 inches, M 42, XL 45, 3XL 48, 5XL 52, from the Diners suiting chart

The waist column rises by 2 inches every size while the chest rises by only 1 to 2. So a man with a 42 inch chest and a 38 inch stomach falls between M on the chest and XL on the waist. That gap is the most common fitting problem with ready-made suits.

Measure yourself for a blazer at home

Wear a thin shirt and stand straight with your arms relaxed. Measure chest, shoulder and sleeve with a soft tape, and have someone else hold it across your back. A jacket you already own gives the best check of all.

  1. Chest: raise your arms slightly and measure around the fullest part of the chest, across the shoulder blades. Lower your arms before you read the tape.
  2. Shoulder: measure across the back from one shoulder bone to the other.
  3. Sleeve: measure from the shoulder bone down to the wrist bone, arm hanging straight.
  4. Length: measure down the back from the base of the collar to where you want the jacket to end, usually around the middle of the seat.
  5. Waist: measure where your trousers sit.
How to measure for a blazer in Pakistan: chest across the shoulder blades, shoulder bone to bone, sleeve to the wrist, length from the collar, waist

To check an old blazer, button it and lay it flat. Measure across the chest from armpit to armpit and double it. Then measure the back from shoulder seam to shoulder seam. Match both figures to the chart.

Buy for the shoulder, alter the rest

Pick the size whose shoulder matches yours, even if the chest or sleeves are slightly off. A tailor can take in the waist, shorten sleeves and let out a little chest. Narrowing or widening a jacket's shoulders is costly work and often does not look right.

Part of the jacketCan a tailor fix it?
Sleeves too longYes, easily
Waist too looseYes, at the side or back seams
Chest slightly tightSometimes, if there is spare cloth in the seam
Jacket too longHard, pockets and vents set the limit
Shoulder too wide or narrowRarely worth it, buy another size
What a tailor can fix on a blazer in Pakistan: sleeves and waist yes, chest sometimes, length hard, shoulder rarely worth it

Signs the shoulder is wrong are easy to see in a mirror. A dent below the shoulder pad means the jacket is too wide. Pulling across the upper arms, or a collar that stands away from the neck, means it is too narrow.

How a suit jacket should fit

When buttoned, the front should lie flat with no X shaped creases. You should see about half an inch of shirt cuff below the sleeve. The collar should touch your shirt collar all the way round, and the length should cover your seat.

The shirt matters as much as the jacket. A collar that is too tight pushes the jacket collar out of line, so check your neck size on the formal shirt size chart by collar inches before buying both. For a wedding season outfit, the same shoulder rule applies to a prince coat, priced in the Almirah sherwani and prince coat list.

Check each brand's chart before you buy

Size letters are not shared across brands. A Diners M is a 42 inch chest, and another brand's M can be an inch either way. Some brands also size suits by chest number, such as 38, 40 or 42, instead of letters. Always compare inches.

Once you know your size, compare cuts and fabrics on the men's suit price list and the men's blazer prices. Try the jacket on at home with the shirt you will wear, and keep the tags on until you are sure.

Common questions

What chest size is a medium blazer in Pakistan?

On the Diners suiting chart a medium blazer has a 42 inch chest, an 18 inch shoulder, 25 inch sleeves and a 29 inch length. Other brands can differ by an inch.

What size suit fits a 40 inch chest?

Diners lists SS at a 40 inch chest and S at 41. Most men with a 40 inch body chest want some room, so try S first and check that the shoulder matches.

Can a tailor fix blazer shoulders?

Rarely well. Shoulder work means taking apart the sleeve and pad, and the result often looks off. Buy the size that fits your shoulders and alter the sleeves or waist instead.

How long should a blazer sleeve be?

It should end at the wrist bone, showing about half an inch of shirt cuff. Diners sleeves run from 24.5 inches for SS to 29 inches for 5XL.

Do suit jacket and trousers come in the same size?

On the Diners chart each jacket size has a matching waist, such as 34 for M. Many men need a different trouser size, so ask whether the shop sells the pieces separately.

How long should a suit jacket be?

It should cover your seat. Diners jackets run from 27.5 inches for SS to 33 inches for 5XL, measured down the back from the collar.

How we verified this

What we checked and where we read it.

We copied every figure from the "Suiting and Blazer Size Guide" in the size chart image on the Diners size chart page on 15 November 2026. The chart lists SS to 5XL and calls itself approximate. M and S share an 18 inch shoulder, and L and M share a 29 inch length, as printed. Measuring steps follow the chest and length instructions on the same chart; the fit checks and alteration advice are general tailoring practice.

About the author

Mahnoor Siddiqui, author at Pakistan Era

Lifestyle & Clothing Writer

Mahnoor Siddiqui

Mahnoor Siddiqui is a lifestyle and clothing writer at Pakistan Era, joining the new lifestyle desk in November 2026.

TopicsBlazerSuitSize ChartMenswearPakistan